Connecting Components

This procedure describes how to connect Control-M/EM to at least one instance of Control-M/Server for both UNIX and Windows.

You do not need to do this procedure if you installed the Control-M full installation option.

Begin

  1. From a Windows computer that has Control-M/EM (full or client) installed, log in to the Control-M Configuration Manager, as described in Logging in to CCM.

    Start up the following components that are necessary to run Control-M as prompted:

    GUI Server

    Global Conditions Server

  2. From the Components menu, select New > Control-M/Server and Gateway.

  3. Select Discover and click OK.

  4. In the Specifying Control-M/Server parameters window, type a name for the new Control-M/Server.

  5. Type the name of the host computer of the Control-M host (the computer where Control-M/Server is installed).

    If Control-M/EM and Control-M/Server were installed with the suggested default parameters, accept the suggested defaults for Control-M ID and Configuration Agent Port, otherwise, check with your system administrator.

  6. Click Next as required.

    The Discover process detects and defines the new Control-M/Server and its gateway in the Control-M Configuration Manager.

  7. If you installed Control-M on UNIX go to Control-M Post Installation Procedures on UNIX.